Title reports $49 · others $100–$400See prices

Radon in Sitka City and Borough, Alaska

Sitka City and Borough, Alaska, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 1 building tests here for 2008 to 2017: median 0.1 pCi/L, with 0% at or above EPA's 4 pCi/L action level (Alaska 17.3%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
0.1
median lab test, pCi/L (2008-2017)
0%
of lab tests at or above 4 pCi/L
1
buildings tested by labs, 2008-2017

Radon test results in Sitka City and Borough

Radon test results on file for Sitka City and Borough, AK, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-20171median 0.1 pCi/L0%
Alaska radon program20223median 0.2 pCi/L0%
Alaska, all counties (labs)2008-2017680n/a17.3%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Hoonah-Angoon Census Area, AKNot determinedn/an/a
Petersburg Borough, AKZone 3n/an/a
Juneau City and Borough, AKZone 360%
Haines Borough, AKZone 3n/an/a
Prince of Wales-Hyder Census Area, AKZone 3n/an/a
Wrangell City and Borough, AKZone 3n/an/a

The six counties with the nearest centers.

What to do about radon in Sitka City and Borough

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Alaska's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Sitka City and Borough address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Sitka City and Borough: questions

What is the radon level in Sitka City and Borough?

The median of the 1 laboratory tests reported for Sitka City and Borough (2008 to 2017) was 0.1 pCi/L, and 0% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Sitka City and Borough in radon Zone 1?

No. EPA's 1993 map puts Sitka City and Borough in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Sitka City and Borough compare with Alaska?

0% of laboratory tests in Sitka City and Borough were at or above 4 pCi/L for 2008 to 2017, against 17.3% across Alaska (680 tests) and 36.5% nationally. 0 of Alaska's 30 counties are in Zone 1.

Should I test for radon in Sitka City and Borough?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Sitka City and Borough

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Alaska county · Radon map of every state

Data compiled 2026-10-20. County FIPS 02220. County-level screening information, not a radon measurement of any building.