Title reports $49 · others $100–$400See prices

Radon in Columbus County, North Carolina

Columbus County, North Carolina, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 26 building tests here for 2008 to 2017: median 0.1 pCi/L, with 0% at or above EPA's 4 pCi/L action level (North Carolina 22.5%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
0.1
median lab test, pCi/L (2008-2017)
0%
of lab tests at or above 4 pCi/L
26
buildings tested by labs, 2008-2017

Radon test results in Columbus County

Radon test results on file for Columbus County, NC, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201726median 0.1 pCi/L0%
North Carolina, all counties (labs)2008-201743,945n/a22.5%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Bladen County, NCZone 3120%
Brunswick County, NCZone 3470%
Horry County, SCZone 3870.9%
Robeson County, NCZone 3473.8%
Marion County, SCZone 380%
Dillon County, SCZone 3160%

The six counties with the nearest centers.

What to do about radon in Columbus County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. North Carolina's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Columbus County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Columbus County: questions

What is the radon level in Columbus County?

The median of the 26 laboratory tests reported for Columbus County (2008 to 2017) was 0.1 pCi/L, and 0% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Columbus County in radon Zone 1?

No. EPA's 1993 map puts Columbus County in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Columbus County compare with North Carolina?

0% of laboratory tests in Columbus County were at or above 4 pCi/L for 2008 to 2017, against 22.5% across North Carolina (43,945 tests) and 36.5% nationally. 8 of North Carolina's 100 counties are in Zone 1.

Should I test for radon in Columbus County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Columbus County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every North Carolina county · Radon map of every state

Data compiled 2026-10-20. County FIPS 37047. County-level screening information, not a radon measurement of any building.