Title reports $49 · others $100–$400See prices

Radon in Stanly County, North Carolina

Stanly County, North Carolina, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 156 building tests here for 2008 to 2017: median 2.2 pCi/L, with 25.3% at or above EPA's 4 pCi/L action level (North Carolina 22.5%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
2.2
median lab test, pCi/L (2008-2017)
25.3%
of lab tests at or above 4 pCi/L
156
buildings tested by labs, 2008-2017

Radon test results in Stanly County

Radon test results on file for Stanly County, NC, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-2017156median 2.2 pCi/L25.3%
North Carolina radon program20222median 0.1 pCi/L0%
North Carolina, all counties (labs)2008-201743,945n/a22.5%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Cabarrus County, NCZone 35198.8%
Montgomery County, NCZone 36220.4%
Anson County, NCZone 3200%
Union County, NCZone 365111.2%
Rowan County, NCZone 338717.7%
Mecklenburg County, NCZone 32,6208.5%

The six counties with the nearest centers.

What to do about radon in Stanly County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. North Carolina's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Stanly County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Stanly County: questions

What is the radon level in Stanly County?

The median of the 156 laboratory tests reported for Stanly County (2008 to 2017) was 2.2 pCi/L, and 25.3% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Stanly County in radon Zone 1?

No. EPA's 1993 map puts Stanly County in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Stanly County compare with North Carolina?

25.3% of laboratory tests in Stanly County were at or above 4 pCi/L for 2008 to 2017, against 22.5% across North Carolina (43,945 tests) and 36.5% nationally. 8 of North Carolina's 100 counties are in Zone 1.

Should I test for radon in Stanly County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Stanly County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every North Carolina county · Radon map of every state

Data compiled 2026-10-20. County FIPS 37167. County-level screening information, not a radon measurement of any building.