Title reports $49 · others $100–$400See prices

Radon in Southeastern Connecticut Planning Region, Connecticut

Southeastern Connecticut Planning Region spans former Connecticut counties in different EPA radon zones: New London County (Zone 1, 95.5% of the land), Windham County (Zone 2, 4.5% of the land). No laboratory test results are on file for this county (no tests reported, or too few to publish).

Mixed (Zones 1 and 2)
EPA radon zone (1993 county map)
n/a
median lab test, pCi/L (2008-2017)
n/a
of lab tests at or above 4 pCi/L
n/a
buildings tested by labs, 2008-2017

Radon test results in Southeastern Connecticut Planning Region

No radon test results are on file for Southeastern Connecticut Planning Region. Its EPA zone is Mixed (Zones 1 and 2).

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Former Connecticut counties in this region

Former countyEPA zoneTownsShare of land
New London CountyZone 11895.5%
Windham CountyZone 214.5%

Towns are matched by name between the old counties and the new planning regions.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Lower Connecticut River Valley Planning Region, CTZone 1n/an/a
Northeastern Connecticut Planning Region, CTMixed (Zones 1 and 2)n/an/a
Washington County, RIZone 15,09039.1%
Kent County, RIZone 15,61026.1%
Capitol Planning Region, CTMixed (Zones 2 and 3)n/an/a
Providence County, RIZone 212,07116.8%

The six counties with the nearest centers.

What to do about radon in Southeastern Connecticut Planning Region

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Connecticut's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Southeastern Connecticut Planning Region address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Southeastern Connecticut Planning Region: questions

What is the radon level in Southeastern Connecticut Planning Region?

No laboratory results are on file for Southeastern Connecticut Planning Region. The county's EPA zone is Mixed (Zones 1 and 2). Only a test of the building gives its level.

Is Southeastern Connecticut Planning Region in radon Zone 1?

Partly. Its towns were in New London County (Zone 1) and Windham County (Zone 2); the radon lookup on this page places an address in its former county.

Should I test for radon in Southeastern Connecticut Planning Region?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Southeastern Connecticut Planning Region

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Connecticut county · Radon map of every state

Data compiled 2026-10-20. County FIPS 09180. County-level screening information, not a radon measurement of any building.