Title reports $49 · others $100–$400See prices

Radon in Kent County, Maryland

Kent County, Maryland, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 37 building tests here for 2008 to 2017: median 4.4 pCi/L, with 52.6% at or above EPA's 4 pCi/L action level (Maryland 24.2%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
4.4
median lab test, pCi/L (2008-2017)
52.6%
of lab tests at or above 4 pCi/L
37
buildings tested by labs, 2008-2017

Radon test results in Kent County

Radon test results on file for Kent County, MD, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201737median 4.4 pCi/L52.6%
Maryland, all counties (labs)2008-201735,201n/a24.2%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Queen Anne's County, MDZone 35316.9%
Harford County, MDZone 14,53422.6%
Cecil County, MDZone 283124.9%
Baltimore city, MDZone 27077.9%
Anne Arundel County, MDZone 22,88217.4%
Baltimore County, MDZone 16,11819.1%

The six counties with the nearest centers.

What to do about radon in Kent County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Maryland's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Kent County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Kent County: questions

What is the radon level in Kent County?

The median of the 37 laboratory tests reported for Kent County (2008 to 2017) was 4.4 pCi/L, and 52.6% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Kent County in radon Zone 1?

No. EPA's 1993 map puts Kent County in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Kent County compare with Maryland?

52.6% of laboratory tests in Kent County were at or above 4 pCi/L for 2008 to 2017, against 24.2% across Maryland (35,201 tests) and 36.5% nationally. 8 of Maryland's 24 counties are in Zone 1.

Should I test for radon in Kent County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Kent County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Maryland county · Radon map of every state

Data compiled 2026-10-20. County FIPS 24029. County-level screening information, not a radon measurement of any building.