Title reports $49 · others $100–$400See prices

Radon in Hill County, Montana

Hill County, Montana, is in EPA radon Zone 1: predicted average indoor radon screening level greater than 4 pCi/L (highest potential). Radon laboratories reported 20 building tests here for 2008 to 2017: median 2.1 pCi/L, with 14.8% at or above EPA's 4 pCi/L action level (Montana 45.6%, US 36.5%).

Zone 1
EPA radon zone (1993 county map)
2.1
median lab test, pCi/L (2008-2017)
14.8%
of lab tests at or above 4 pCi/L
20
buildings tested by labs, 2008-2017

Radon test results in Hill County

Radon test results on file for Hill County, MT, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201720median 2.1 pCi/L14.8%
Montana, all counties (labs)2008-20176,612n/a45.6%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Liberty County, MTZone 1133.3%
Chouteau County, MTZone 1754.5%
Blaine County, MTZone 166.7%
Toole County, MTZone 1845.5%
Pondera County, MTZone 150%
Phillips County, MTZone 1n/an/a

The six counties with the nearest centers.

What to do about radon in Hill County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Montana's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Hill County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Hill County: questions

What is the radon level in Hill County?

The median of the 20 laboratory tests reported for Hill County (2008 to 2017) was 2.1 pCi/L, and 14.8% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Hill County in radon Zone 1?

Yes. EPA's 1993 Map of Radon Zones puts Hill County in Zone 1, the counties with a predicted average indoor radon screening level above 4 pCi/L.

How does radon in Hill County compare with Montana?

14.8% of laboratory tests in Hill County were at or above 4 pCi/L for 2008 to 2017, against 45.6% across Montana (6,612 tests) and 36.5% nationally. 49 of Montana's 56 counties are in Zone 1.

Should I test for radon in Hill County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Hill County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Montana county · Radon map of every state

Data compiled 2026-10-20. County FIPS 30041. County-level screening information, not a radon measurement of any building.