Title reports $49 · others $100–$400See prices

Radon in Roosevelt County, Montana

Roosevelt County, Montana, is in EPA radon Zone 1: predicted average indoor radon screening level greater than 4 pCi/L (highest potential). Radon laboratories reported 12 building tests here for 2008 to 2017: median 8.7 pCi/L, with 93.8% at or above EPA's 4 pCi/L action level (Montana 45.6%, US 36.5%).

Zone 1
EPA radon zone (1993 county map)
8.7
median lab test, pCi/L (2008-2017)
93.8%
of lab tests at or above 4 pCi/L
12
buildings tested by labs, 2008-2017

Radon test results in Roosevelt County

Radon test results on file for Roosevelt County, MT, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201712median 8.7 pCi/L93.8%
Montana, all counties (labs)2008-20176,612n/a45.6%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Sheridan County, MTZone 15975.7%
Richland County, MTZone 12978.6%
Daniels County, MTZone 120%
McCone County, MTZone 120%
Williams County, NDZone 115033.8%
Dawson County, MTZone 14647.5%

The six counties with the nearest centers.

What to do about radon in Roosevelt County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Montana's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Roosevelt County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Roosevelt County: questions

What is the radon level in Roosevelt County?

The median of the 12 laboratory tests reported for Roosevelt County (2008 to 2017) was 8.7 pCi/L, and 93.8% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Roosevelt County in radon Zone 1?

Yes. EPA's 1993 Map of Radon Zones puts Roosevelt County in Zone 1, the counties with a predicted average indoor radon screening level above 4 pCi/L.

How does radon in Roosevelt County compare with Montana?

93.8% of laboratory tests in Roosevelt County were at or above 4 pCi/L for 2008 to 2017, against 45.6% across Montana (6,612 tests) and 36.5% nationally. 49 of Montana's 56 counties are in Zone 1.

Should I test for radon in Roosevelt County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Roosevelt County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Montana county · Radon map of every state

Data compiled 2026-10-20. County FIPS 30085. County-level screening information, not a radon measurement of any building.