Title reports $49 · others $100–$400See prices

Radon in Buncombe County, North Carolina

Buncombe County, North Carolina, is in EPA radon Zone 1: predicted average indoor radon screening level greater than 4 pCi/L (highest potential). Radon laboratories reported 3,901 building tests here for 2008 to 2017: median 2.3 pCi/L, with 29% at or above EPA's 4 pCi/L action level (North Carolina 22.5%, US 36.5%).

Zone 1
EPA radon zone (1993 county map)
2.3
median lab test, pCi/L (2008-2017)
29%
of lab tests at or above 4 pCi/L
3,901
buildings tested by labs, 2008-2017

Radon test results in Buncombe County

Radon test results on file for Buncombe County, NC, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-20173,901median 2.3 pCi/L29%
North Carolina radon program202233median 2.5 pCi/L38%
North Carolina, all counties (labs)2008-201743,945n/a22.5%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Henderson County, NCZone 12,12941.8%
Madison County, NCZone 216116.7%
Yancey County, NCZone 219531%
Haywood County, NCZone 21,01530.6%
McDowell County, NCZone 253737.5%
Polk County, NCZone 234029.8%

The six counties with the nearest centers.

What to do about radon in Buncombe County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. North Carolina's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Buncombe County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Buncombe County: questions

What is the radon level in Buncombe County?

The median of the 3,901 laboratory tests reported for Buncombe County (2008 to 2017) was 2.3 pCi/L, and 29% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Buncombe County in radon Zone 1?

Yes. EPA's 1993 Map of Radon Zones puts Buncombe County in Zone 1, the counties with a predicted average indoor radon screening level above 4 pCi/L.

How does radon in Buncombe County compare with North Carolina?

29% of laboratory tests in Buncombe County were at or above 4 pCi/L for 2008 to 2017, against 22.5% across North Carolina (43,945 tests) and 36.5% nationally. 8 of North Carolina's 100 counties are in Zone 1.

Should I test for radon in Buncombe County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Buncombe County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every North Carolina county · Radon map of every state

Data compiled 2026-10-20. County FIPS 37021. County-level screening information, not a radon measurement of any building.