Title reports $49 · others $100–$400See prices

Radon in Walsh County, North Dakota

Walsh County, North Dakota, is in EPA radon Zone 1: predicted average indoor radon screening level greater than 4 pCi/L (highest potential). Radon laboratories reported 89 building tests here for 2008 to 2017: median 9.8 pCi/L, with 79.5% at or above EPA's 4 pCi/L action level (North Dakota 58.9%, US 36.5%).

Zone 1
EPA radon zone (1993 county map)
9.8
median lab test, pCi/L (2008-2017)
79.5%
of lab tests at or above 4 pCi/L
89
buildings tested by labs, 2008-2017

Radon test results in Walsh County

Radon test results on file for Walsh County, ND, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201789median 9.8 pCi/L79.5%
North Dakota, all counties (labs)2008-20175,054n/a58.9%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Pembina County, NDZone 14182.5%
Grand Forks County, NDZone 152275.9%
Nelson County, NDZone 11163.2%
Cavalier County, NDZone 12150%
Ramsey County, NDZone 18976.9%
Kittson County, MNZone 11530.4%

The six counties with the nearest centers.

What to do about radon in Walsh County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. North Dakota's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Walsh County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Walsh County: questions

What is the radon level in Walsh County?

The median of the 89 laboratory tests reported for Walsh County (2008 to 2017) was 9.8 pCi/L, and 79.5% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Walsh County in radon Zone 1?

Yes. EPA's 1993 Map of Radon Zones puts Walsh County in Zone 1, the counties with a predicted average indoor radon screening level above 4 pCi/L.

How does radon in Walsh County compare with North Dakota?

79.5% of laboratory tests in Walsh County were at or above 4 pCi/L for 2008 to 2017, against 58.9% across North Dakota (5,054 tests) and 36.5% nationally. 53 of North Dakota's 53 counties are in Zone 1.

Should I test for radon in Walsh County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Walsh County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every North Dakota county · Radon map of every state

Data compiled 2026-10-20. County FIPS 38099. County-level screening information, not a radon measurement of any building.