Title reports $49 · others $100–$400See prices

Radon in Pulaski County, Illinois

Pulaski County, Illinois, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 9 building tests here for 2008 to 2017: median 2.0 pCi/L, with 18.2% at or above EPA's 4 pCi/L action level (Illinois 43.2%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
2.0
median lab test, pCi/L (2008-2017)
18.2%
of lab tests at or above 4 pCi/L
9
buildings tested by labs, 2008-2017

Radon test results in Pulaski County

Radon test results on file for Pulaski County, IL, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-20179median 2.0 pCi/L18.2%
Illinois, all counties (labs)2008-201785,532n/a43.2%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Alexander County, ILZone 3822.2%
Ballard County, KYZone 340%
Union County, ILZone 26425.3%
Johnson County, ILZone 24114.6%
Massac County, ILZone 32815.2%
McCracken County, KYZone 32221.4%

The six counties with the nearest centers.

What to do about radon in Pulaski County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Illinois's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Pulaski County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Pulaski County: questions

What is the radon level in Pulaski County?

The median of the 9 laboratory tests reported for Pulaski County (2008 to 2017) was 2.0 pCi/L, and 18.2% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Pulaski County in radon Zone 1?

No. EPA's 1993 map puts Pulaski County in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Pulaski County compare with Illinois?

18.2% of laboratory tests in Pulaski County were at or above 4 pCi/L for 2008 to 2017, against 43.2% across Illinois (85,532 tests) and 36.5% nationally. 56 of Illinois's 102 counties are in Zone 1.

Should I test for radon in Pulaski County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Pulaski County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Illinois county · Radon map of every state

Data compiled 2026-10-20. County FIPS 17153. County-level screening information, not a radon measurement of any building.