Title reports $49 · others $100–$400See prices

Radon in Hot Springs County, Wyoming

Hot Springs County, Wyoming, is in EPA radon Zone 1: predicted average indoor radon screening level greater than 4 pCi/L (highest potential). Radon laboratories reported 35 building tests here for 2008 to 2017: median 4.2 pCi/L, with 55.9% at or above EPA's 4 pCi/L action level (Wyoming 43.1%, US 36.5%).

Zone 1
EPA radon zone (1993 county map)
4.2
median lab test, pCi/L (2008-2017)
55.9%
of lab tests at or above 4 pCi/L
35
buildings tested by labs, 2008-2017

Radon test results in Hot Springs County

Radon test results on file for Hot Springs County, WY, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201735median 4.2 pCi/L55.9%
Wyoming, all counties (labs)2008-20174,713n/a43.1%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Washakie County, WYZone 16338.5%
Fremont County, WYZone 132255.7%
Big Horn County, WYZone 15242.4%
Park County, WYZone 125842.8%
Johnson County, WYZone 17634.8%
Natrona County, WYZone 166455.7%

The six counties with the nearest centers.

What to do about radon in Hot Springs County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Wyoming's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Hot Springs County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Hot Springs County: questions

What is the radon level in Hot Springs County?

The median of the 35 laboratory tests reported for Hot Springs County (2008 to 2017) was 4.2 pCi/L, and 55.9% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Hot Springs County in radon Zone 1?

Yes. EPA's 1993 Map of Radon Zones puts Hot Springs County in Zone 1, the counties with a predicted average indoor radon screening level above 4 pCi/L.

How does radon in Hot Springs County compare with Wyoming?

55.9% of laboratory tests in Hot Springs County were at or above 4 pCi/L for 2008 to 2017, against 43.1% across Wyoming (4,713 tests) and 36.5% nationally. 21 of Wyoming's 23 counties are in Zone 1.

Should I test for radon in Hot Springs County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Hot Springs County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Wyoming county · Radon map of every state

Data compiled 2026-10-20. County FIPS 56017. County-level screening information, not a radon measurement of any building.