Title reports $49 · others $100–$400See prices

Radon in Platte County, Wyoming

Platte County, Wyoming, is in EPA radon Zone 2: predicted average indoor radon screening level from 2 to 4 pCi/L (moderate potential). Radon laboratories reported 93 building tests here for 2008 to 2017: median 2.4 pCi/L, with 26.5% at or above EPA's 4 pCi/L action level (Wyoming 43.1%, US 36.5%).

Zone 2
EPA radon zone (1993 county map)
2.4
median lab test, pCi/L (2008-2017)
26.5%
of lab tests at or above 4 pCi/L
93
buildings tested by labs, 2008-2017

Radon test results in Platte County

Radon test results on file for Platte County, WY, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201793median 2.4 pCi/L26.5%
Wyoming, all counties (labs)2008-20174,713n/a43.1%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Goshen County, WYZone 110541.7%
Albany County, WYZone 124327.9%
Laramie County, WYZone 11,29725.5%
Converse County, WYZone 18562.3%
Sioux County, NEZone 21331.6%
Scotts Bluff County, NEZone 241157.2%

The six counties with the nearest centers.

What to do about radon in Platte County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Wyoming's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Platte County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Platte County: questions

What is the radon level in Platte County?

The median of the 93 laboratory tests reported for Platte County (2008 to 2017) was 2.4 pCi/L, and 26.5% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Platte County in radon Zone 1?

No. EPA's 1993 map puts Platte County in Zone 2 (predicted average indoor radon screening level from 2 to 4 pCi/L (moderate potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Platte County compare with Wyoming?

26.5% of laboratory tests in Platte County were at or above 4 pCi/L for 2008 to 2017, against 43.1% across Wyoming (4,713 tests) and 36.5% nationally. 21 of Wyoming's 23 counties are in Zone 1.

Should I test for radon in Platte County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Platte County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Wyoming county · Radon map of every state

Data compiled 2026-10-20. County FIPS 56031. County-level screening information, not a radon measurement of any building.