Title reports $49 · others $100–$400See prices

Radon in Williamson County, Texas

Williamson County, Texas, is in EPA radon Zone 3: predicted average indoor radon screening level less than 2 pCi/L (low potential). Radon laboratories reported 82 building tests here for 2008 to 2017: median 0.7 pCi/L, with 1.9% at or above EPA's 4 pCi/L action level (Texas 11.3%, US 36.5%).

Zone 3
EPA radon zone (1993 county map)
0.7
median lab test, pCi/L (2008-2017)
1.9%
of lab tests at or above 4 pCi/L
82
buildings tested by labs, 2008-2017

Radon test results in Williamson County

Radon test results on file for Williamson County, TX, with state and national comparison
Test resultsPeriodTestsTypical result4 pCi/L or more
Radon testing laboratories2008-201782median 0.7 pCi/L1.9%
Texas, all counties (labs)2008-20172,382n/a11.3%
United States (labs)2008-20171,408,802n/a36.5%

Test results describe buildings whose owners chose to test and whose results reached the lab or agency, not a random sample; small counts swing widely. State and US shares are computed from county counts and percents. The laboratory data comes from national radon testing laboratories and supplements EPA's zone map.

Radon in nearby counties

CountyEPA zoneLab tests4 pCi/L or more
Bell County, TXZone 32016.7%
Travis County, TXZone 31949.2%
Burnet County, TXZone 3471.4%
Milam County, TXZone 3n/an/a
Bastrop County, TXZone 3561.5%
Lee County, TXZone 3n/an/a

The six counties with the nearest centers.

What to do about radon in Williamson County

Test the building. EPA recommends fixing a home at 4 pCi/L or more and considering a fix between 2 and 4 pCi/L, and says there is no known safe level of exposure. Texas's state radon program can point you to testers and test kits.

Buying here? The Environmental Records Report lists this county's radon zone and test results with the flood zone, mapped faults, power lines and federal contamination records near the address.

Check one Williamson County address

Environmental Records Report, $29. PDF and JSON, usually ready in about a minute.

Radon in Williamson County: questions

What is the radon level in Williamson County?

The median of the 82 laboratory tests reported for Williamson County (2008 to 2017) was 0.7 pCi/L, and 1.9% of them were at or above 4 pCi/L. These are results of tested buildings; a single home can be far above or below them.

Is Williamson County in radon Zone 1?

No. EPA's 1993 map puts Williamson County in Zone 3 (predicted average indoor radon screening level less than 2 pCi/L (low potential)). EPA says homes in every zone can have high radon and should be tested.

How does radon in Williamson County compare with Texas?

1.9% of laboratory tests in Williamson County were at or above 4 pCi/L for 2008 to 2017, against 11.3% across Texas (2,382 tests) and 36.5% nationally. 0 of Texas's 254 counties are in Zone 1.

Should I test for radon in Williamson County?

Yes. EPA recommends testing every home whatever its zone: "This map should not be used to determine if individual homes need to be tested." Fix the home at 4 pCi/L or more and consider a fix between 2 and 4 pCi/L; EPA says there is no known safe level of radon exposure.

More for Williamson County

Other free hazard lookups

All of these, plus wetlands, FEMA hazard ratings and the federal contamination lists, are in the Environmental Records Report for any US address ($29).

Radon in every Texas county · Radon map of every state

Data compiled 2026-10-20. County FIPS 48491. County-level screening information, not a radon measurement of any building.